8E1 ( 75ohm) to ETH(10/100M) DC48V Protocol Converter

Add to My Favorites Download QR Code

Share product to :

8E1 ( 75ohm) to ETH(10/100M) DC48V Protocol Converter

QTY

FOB PRICE
CIF PRICE

Please contact the supplier to get the latest CIF price
QUANTITY

-

+

PCS
TOTAL COST
$1660

Specification

Model : 8E1	Payment Terms : T/T	delivery Time : 15	Product Advantages : Well and High Quality Control, Prompt Delivery, New Product, Competitive Prices, Small Order Acceptable
Material : Default

Packing Information

Pcs/Carton : 6	Packing Size/Carton : 565465265	Packing Vol/Carton : N/A
N.W./Carton : N/A	G.W./Carton : 14.5	QTY in 40HQ : N/A
QTY in 40GP : N/A	QTY in 20GP : N/A

Product Introduction

8E1-1FE interface Converte

ESCRIPTION

This interface converter is based on FPGA, using reverse direction multiplexing technology to bundle for multiple E1 circuits to transmit the Ethernet data of 100BASE-TX. It can realize 1-8E1 channel to convert between Ethernet optical interface. This device can transmit the transceiver signal point to point to Ethernet optical interface to make E1 channels interconnected with Ethernet optical interface. Unlike general remote network bridge, this device can support 1-8Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available. It allows E1 lines transmission time delay difference

FEATURES

Based on self -copyright IC
To achieve Ethernet data transparent transmission in 1-8E1 circuits
Can realize the local and the remote device reset
Ethernet Interface is 100BASE-FX, support VLAN protocol
Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering function
Single Channel lines rate is 1984Kbit/s, 4Channel Bandwidth is up to 7936Kbit/s
Support all set of Ethernet Work Mode
CRC automatic alarm threshold can be set to isolate the poor quality transmission lines and cut off a single-direction. When 2M branch circuit one direction error rate exceeds threshold, cutting off this direction the other direction is not affected; that is to say, both of the Ethernet direction transmission can be asymmetric
Allow 8Channel E1 transmission time delay difference 100ms. When the margin exceed the allowed range, the system can automatically stop on the E1 that time delay is too large to send data
E1 interface conform to ITU-T G.703, G.704 and G.823, not support the use of signal timeslot
E1 interface module with inter-set clock recovery circuit and HDB3 code circuit
Support E1 channel hot-plug in the device, and automatically detects the effective E1 channel and will not interrupt data transmission
Can support 1-8Channel E1 channel configuration, can automatically detect the number of E1 and select the E1 available
Framed 8E1-1ETH Converter
APPLICATION

E1 Interface	Interface Standard	Comply with protocol G.703
	Interface Rate:	2048Kbps ± 50ppm
	Interface Code	HDB3
	E1 Impedance	75Ω (unbalance), 120Ω (balance)
	Jitter tolerance	In accord with protocol G.742 and G.823
	Allowed Attenuation	0~6dBm
Ethernet interface (10/100M)	Interface rate	10/100 Mbps, half/full duplex auto-negotiation
	Interface Standard	Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)
	MAC Address Capability	4096
	Connector	RJ45, Support Auto-MDIX
Power	Power supply	AC180V ~ 260V；DC –48V；DC +24V
Power	Power consumption	≤ 5W
Dimension	Mini Type	216（width）X140（depth）X31（height）mm
Dimension	19 inch 1U	483（width）X138（depth）X44（height）mm
Working environment	Working temperature	-10°C ~ 50°C （14°F ~ 122°F )
	Working Humidity	5%~95 % (no condensation)
	Storage temperature	-40°C ~ 80°C （-40°F ~ 176°F ）
	Storage Humidity	5%~95 % (no condensation)

• Amanbo Return Policy applies to all orders on amanbo.com.

• If products are not as described, returns are accepted and return shipping fee should be paid by buyer.

• If products are as described, seller has the right to refuse return. Buyer should pay return shipping fee if return require is insisted on.