QTY |
FOB PRICE |
CIF PRICE
QUANTITY
-
+
l
TOTAL COST
$1660Model : M-K | Payment Terms : L/C, T/T | delivery Time : 15~25 | Product Advantages : Well and High Quality Control, Prompt Delivery, New Product, Welcome customer designs and trademarks, Competitive Prices, Fit for Gifts and Premiums, Earth-friendly Products, In a Variety of Design, Small Order Acceptable, ODM Accepted, OEM Accepted, Other |
Material : Default |
Pcs/Carton : N/A | Packing Size/Carton : N/A | Packing Vol/Carton : N/A |
N.W./Carton : N/A | G.W./Carton : N/A | QTY in 40HQ : N/A |
QTY in 40GP : N/A | QTY in 20GP : N/A |
Thinner
The thinner is designed for Chenghong series of 2K top coat, 1K base coat, clear coat, 2K primer, etc. Standard, quick drying, slow drying and ultra slow drying types are available for different varieties. And available to match different application requirement and temperatures.
Product Usage: It has good dissolution and promote bonding effect.
Operation Parameter
Fast Dry Thinner | The fastest volatilization rate, special thinner for 1K base paint. Apply to the partial repair or use it below 15 ℃. |
Standard Dry Thinner | The medium volatilization rate, general purpose thinner for 1K base paint and 2K car paint. Suitable for and partial repair, used at 15 ℃ to 25 ℃. |
Slow Dry | The slower volatilization rate, slow dry thinner for 1K base paint and 2K car paint. Suitable for the whole car spraying and partial repair, used at 25 ℃ to 30 ℃. |
Ultra Slow Dry | The slowest volatilization rate, special thinner for 2K car paint. Applies to whole car spraying or large area spraying above 30 ℃. |
Shelf Life: 2 years if stored in Original sealed containers at 20℃
Hardener
The car paint hardener / curing agent is designed for 2k Solid Colour Paint and Varnish. High concentrated, yellow resistant hardener. Standard, quick drying and slow drying types are available for different varieties. And available to match different application requirement and temperatures.
Match with: 2K solid colours, Varnish
Operation Parameter
Fast Dry Hardener | Apply to the partial repair or use it below 18 ℃. |
Standard Dry Hardener | Suitable for the whole car spraying and partial repair, used at 18 ℃ to 30 ℃. |
Slow Dry Hardener | Applies to whole car spraying or large area spraying above 30 ℃. |
Shelf Life: 2 years if stored in Original sealed containers at 20°C
Note: After using the hardener, it should be tightly sealed and stored in a cool dry place to avoid thickening or hardening of the hardener. Hardener should avoid direct sunlight.
Degreaser Car Paint
Characteristic: Remove grease, oil and other contaminants to avoid unnecessary paint film defects.
Substrate: Any topcoat, primer, putty and metal’s surface.
Usage:
1. The product is ready for use.
2. Spray or abrade the surface by the degreaser dust cloth
3. Smear again with the clean and dry dust cloth.
Fade-out Thinner
Characteristic:When doing partial repair, It can dissolve the interface position of the old and new paint film, make the new and old paint film dissolve as a whole, make the paint film color of roll line edge location being more smooth and softer, and achieve perfect repair effect.
Substrate: Suitable for 2K solid topcoat or 2K varnish.
Mixing Ratio: Use without mixing. If you want to mix, can be mixed with the paint that remained in the spray gun at Ratio 1:1.
Spray-Painted Method: After finishing the painting make-up, gently spray the interface solvent on the interface immediately, then gently spray it 20 seconds later.
Shelf Life: 2 years if stored in Original sealed containers at 20°C
NOTE:
Not suitable for 1K Basecoat and Primer.
Anti-silicone
Suitable for 2K solid color and varnish, able to remove fisheyes on the paint film.
Mixing Ratio: For every litre of hardener and thinner containing paint,one could add 0.5-2caps(4-15g) of the Anti-silicone.
Spray Methods: If fish eyes are found in the first round of spraying, spraying the paint with anti-fisheye agent may remove the emerged fish eyes.
Shelf Life: 2 years if stored in Original sealed containers at 20°C
NOTE:
1. Mix with right ratio of Anti-silicon. Excess addition may cause defect of small bubbles or pinholes.
2. In serious problems, fisheyes affected paint film must be sanded out and filled whtn it is hard dry. Refinish with paint mixed with Anti-silicon.
Matting Agent
The matting agent with surface organic treatment is high quality film coating.Its paint film has fineness hand-feeling,smoothness,higher transparency.
Substrate: 2K solid color, varnish and 1K primer
Mixing Ratio:
1K primer | Matting agent=(85-70) : (15-30) | |||
2K solid color | Gloss | 2K solid color | Matting agent | Hardener |
Full matte | 30 | 70 | 15 | |
Semi-matte | 50 | 50 | 25 | |
Highlight | 70 | 30 | 35 |
Shelf Life: 2 years if stored in Original sealed containers at 20°C
NOTE:
1. Recommended to use soon after open,prevent moisture affecting the results.
• Amanbo Return Policy applies to all orders on amanbo.com.
• If products are not as described, returns are accepted and return shipping fee should be paid by buyer.
• If products are as described, seller has the right to refuse return. Buyer should pay return shipping fee if return require is insisted on.