Insulated intermediate fittings and straight through fittings
1, the use of imported high elasticity transparent liquid silicone rubber overall prefabrication, easy product testing;
2, the use of reinforced stress cone structure, enhanced end seal effect, reducing the stress cone deformation in the case of deformation;
3, the use of composite pre-expansion technology, accessories can be achieved rapid cooling installation, shorten the product installation time and improve the quality of product installation;
4, according to user needs, can achieve the cable shield insulation, through the connection;
5, the cable connector in the hexagonal die according to the provisions of tonnage crimp, contact resistance is small, with strong mechanical strength, can fully meet the normal operation of the line and short circuit running requirements;
6, cable insulation / through the middle connector with the overall prefabricated structure, with the cable insulation diameter with a single side greater than 4mm, the interface pressure is greater than 2MPa, can ensure that the insulation interface with sufficient compression force;
7, the cable insulation of the middle of the use of FRP waterproof shell seal structure, filled in the waterproof shell at room temperature curing waterproofing agent, with good water resistance. At the same time, FRP waterproof shell with strong mechanical strength, and cable jacket can achieve the same level of insulation and can withstand a certain mechanical external impact.